Artificial stone For Garden S-07

Many residential gardens contain standard utility elements at ground level — manhole covers, drainage inspection lids, irrigation valve boxes, socket enclosures — that measure 40–45 cm in diameter. These objects are functional necessities, but they interrupt the visual order of an otherwise considered outdoor space.

The compact models in the GARTENDEK lineup (S-01 at ø 39 cm, S-04 at ø 33 cm) cannot span them. The S-03 covers the same ø 45 cm but weighs 9 kg and rises 46 cm above ground — disproportionately heavy and tall when the hidden object is flat and ground-level.

Traditional alternatives are equally limited. Natural stone of this coverage size weighs 60–150 kg and cannot be hollowed. Budget plastic covers are lightweight but their painted surfaces degrade within two to three outdoor seasons.

The S-07 fills this gap with surgical precision: 45 cm coverage in a body that weighs just 5.70 kg, stands only 23 cm tall, and fits within a 51 × 45 cm footprint — the most compact form factor for ø 45 cm coverage in the GARTENDEK range. For routine-access scenarios — lifting the cover to check an irrigation timer, adjust a socket, or inspect a drainage point — the S-07 is the practical, ergonomic answer.

The S-07 is a hollow shell with an asymmetric wedge-boulder profile — a peaked ridge on one side (approximately 23 cm) that tapers to a low, flat edge on the opposite side. The interior provides a usable coverage diameter of ~45 cm.

Installation is immediate. Place the stone directly over the target object on any surface. No anchoring, no foundation, no tools. Total setup time: under one minute. To access the equipment underneath, simply lift the stone with one hand and set it aside — at 5.70 kg, this is effortless.

Stability comes from the stone’s own weight and its broad, angular base footprint (~51 × 45 cm). The asymmetric form provides good ground contact. On sloped terrain, a small gravel bed improves contact, but is not required.

Seasonal behavior is neutral. The fiberglass composite structure does not absorb water, does not expand or contract meaningfully with temperature changes, and tolerates a continuous operating range from −30 °C to +60 °C. The stone performs identically in summer heat, autumn rain, and winter frost. It does not need to be removed, covered, or stored during any season.

Base contact — the stone has a non-sealed base and rests directly on the ground surface. It is not hermetically sealed; natural micro air exchange between the interior cavity and the surrounding environment is possible through the ground contact zone.

Safety and load limitations — the product supports 100+ kg of static load under normal conditions. It is not a load-bearing structure, is not designed for impact loads, and is not intended for jumping or active play without prior structural adaptation of the product. Use in children’s and public zones is possible with a pre-agreed usage scenario, engineering adaptation of the structure, and coordination of safety requirements.

The S-07 is constructed from a multi-layer fiberglass composite — the same class of material used in boat hull construction, chosen for its strength-to-weight ratio and long-term weather resistance.

The outer surface is a marble chip and marble powder gelcoat of the ISO/NPG class. The color is not painted, printed, or applied as a film. Instead, natural stone chips and stone dust of different colors are mixed directly into the gelcoat compound during manufacturing. This means the color and grain are embedded in the material itself, producing a surface that ages gracefully rather than peeling, flaking, or fading.

Compared with typical alternatives:

The S-07 occupies a deliberate middle position: lighter than stone or concrete, far more durable and realistic than budget plastic, and uniquely combining a hollow interior with a load-bearing, marine-grade composite shell.

Maintenance is minimal. Clean occasionally with water and a soft brush. No sealing, repainting, or chemical treatment is ever required.

Standard utility concealment

Cover a standard manhole cover or inspection lid (ø 40–45 cm) in a lawn or driveway. The S-07’s 45 cm coverage diameter is sized precisely for the most common residential utility access points. At 5.70 kg, seasonal inspections require no effort — lift with one hand, inspect, replace.

Frequent-access equipment

Conceal an irrigation timer, garden socket enclosure, or junction box that is accessed regularly. Where heavier models (S-03, S-05) make frequent lifting inconvenient, the S-07 weighs just 5.70 kg — lighter than S-04 (6 kg) — making it the most convenient wide-coverage stone for routine maintenance scenarios.

Pond and water feature integration

At the edge of a pond or fountain, the S-07 hides a pump housing or filter cable run while its angular wedge-boulder form blends naturally with surrounding stones and planting.

Rockery and naturalistic garden design

The asymmetric wedge profile makes S-07 particularly effective as a standalone decorative element in rockeries, mixed borders, and along pathways — places where an angular, weathered boulder looks like a natural geological feature rather than a placed object.

Tree stump concealment

Cover a tree stump (up to ø 45 cm) cut flush with or slightly above ground level, replacing an unsightly remnant with a natural stone accent.

Terrace and yard organization

Near a terrace, the S-07 conceals a drainage inspection point, a cable bundle, or a low-voltage transformer for garden lighting. The compact footprint (51 × 45 cm) fits even in tight spaces between a path and a hedge.

The S-07 is the efficiency-optimized model in the GARTENDEK S-series — delivering the best coverage-to-weight ratio (ø 45 cm at 5.70 kg) and the most compact footprint for its coverage class.

It shares the same 45 cm coverage diameter as S-03 (the tallest, dome-shaped model), but at 37% less weight and 50% less height. At €186.35 including delivery, it sits in the mid-range tier — significantly below S-03 (€254.88) and S-05 (€254.20), yet offering 45 cm coverage that exceeds S-06 (ø 42 cm) and S-02 (ø 41 cm).

Choose the S-07 when:

• The object to conceal measures ≤45 cm in diameter
• The object is standard height (under ~20 cm)
• Frequent access and easy one-hand lifting are priorities
• You want wide coverage without the weight premium of S-03 or S-05
• An angular, naturalistic boulder accent suits the garden style

Consider a different model when:

• The target object is taller than 23 cm — S-03 (46 cm tall, same ø 45 cm)
• The target object is wider than 45 cm — S-05 (ø 49 cm)
• A smaller coverage is sufficient — S-01 (ø 39 cm, 5 kg, €164) or S-04 (ø 33 cm)
• An ultra-flat profile is needed — S-06 (19 cm, ø 42 cm)
• Coverage beyond ø 49 cm is required — M/L/XL series

The S-07 works well as a standalone accent or as part of a multi-stone arrangement using different GARTENDEK models to create a varied, natural-looking stone grouping.

Does the S-07 look realistic, or will people notice it is artificial?
The surface is formed from real marble chips and marble powder embedded in an ISO/NPG gelcoat — not painted. At normal viewing distance (1 m+), the S-07 is not identifiable as artificial.

What makes the S-07 different from other S-series models?
Best coverage-to-weight ratio in S-series: ø 45 cm at 5.70 kg. Same ø 45 cm as S-03 but 37% lighter and 50% lower.

Can I install it myself, and how long does it take?
Yes. No tools, no foundation, no anchoring. Typical installation time: under 1 minute.

Will it fade or crack after years of outdoor use?
No. UV stability is built into ISO/NPG gelcoat. Declared service life: 10+ years.

What is the maximum object size the S-07 can cover?
Interior coverage diameter ~45 cm, clearance ~20 cm. For taller objects choose S-03; for wider choose S-05.

Can I place it directly on grass or soil?
Yes. No site preparation. On slopes, a small gravel base can improve contact but is not mandatory.

How heavy is the S-07 compared to a natural stone of the same size?
Natural stone would weigh ~60–150 kg; S-07 weighs 5.70 kg.

Is it safe if someone accidentally steps on the S-07?
Yes. Supports 100+ kg static load.

What maintenance does the S-07 require?
Minimal: rinse with water and a soft brush.

Where is the S-07 manufactured?
EU — manufactured in Italy, dispatched from Slovenia by VSDN d.o.o.

Can I drill holes in the GARTENDEK S-07 for cables or pipes?
Yes. GFK can be drilled or cut; walls are typically 10–15 mm.