Artificial stone For Garden S-06

The Problem: many garden utilities sit at or barely above ground level: flush manhole covers, level drain lids, ground-flush tree stumps, flat meter box lids, cable entry points, and low valve housings. These objects are typically wide (up to ø 42 cm) but rise no more than ~15 cm above the surface.

Standard artificial stone covers are too tall for these objects. The S-01 stands 23 cm, the S-03 rises to 46 cm — placed over a flush lid, they create a conspicuous hump that draws attention rather than concealing.

The Solution: an ultra-flat stone that hugs the ground. The S-06 resolves this with just 19 cm total height — the lowest profile of any S-series model. The broad, flat disc shape (56 × 51 cm footprint) distributes the silhouette horizontally, mimicking a natural fieldstone that has settled into the ground over time.

The result: a stone that doesn’t sit on the lawn — it sits in the landscape. For flush-with-ground objects, this is the only proportionate concealment solution in the GARTENDEK lineup.

No tools. No foundation. No expertise.

• Place the S-06 directly over the target object on any surface — grass, soil, gravel, paving
• On soft ground, press the wide base (56 × 51 cm) lightly into the soil for enhanced stability
• Rotate slightly to achieve the most natural appearance

Installation time: under 1 minute.

Equipment access: lift the stone with one hand (6 kg), perform maintenance, replace. Low centre of gravity + broad base provide excellent wind stability — no anchoring required.

Note: handmade production — colour and dimensional variations of 3–5 cm are normal and contribute to natural appearance.

Safety and load limitations: supports 100+ kg static load under normal conditions. Not load-bearing, not designed for impact loads, and not intended for jumping or active play without structural adaptation. Use in children’s/public zones is possible with a pre-agreed usage scenario, engineering adaptation, and safety coordination.

The S-06 is constructed from multi-layer fiberglass composite — the same material class used in marine construction. The outer surface is natural marble chips and marble powder in an ISO/NPG class gelcoat.

Colour is not applied as paint or film — it is formed by adding natural stone chips and stone dust directly into the gelcoat compound. The colour is an integral part of the material. Available in two variants: Gray and Red.

At 1 metre viewing distance, the S-06 is indistinguishable from a natural granite fieldstone.

• Frost-proof: to −30 °C
• UV-stable: to +60 °C — no fading, no chalking
• Fully waterproof: no moisture absorption
• Static load capacity: 100+ kg
• Declared service life: 10+ years
• Maintenance: rinse with water and a soft brush

Comparison with alternatives:

The S-06 fits objects with a footprint up to ø 42 cm and a height up to ~15 cm above ground:

Flush manhole cover or drain lid (ø 35–42 cm)

The ultra-flat 19 cm profile sits naturally over flush covers without creating an unnatural bump on the lawn.

Ground-flush tree stump (≤ 15 cm, up to ø 42 cm)

Low-cut stumps that barely protrude are concealed by the S-06’s disc-like shape, blending into the landscape as a natural fieldstone.

Ground-level utility meter box (gas, water, electric)

Flat meter lids in lawns and paved areas fit within the S-06’s ø 42 cm coverage, replacing an industrial element with a natural stone accent.

Flat irrigation valve manifold box / sprinkler control lid

Shallow valve boxes and manifolds in flower beds fit within the S-06’s coverage — keeping the planting zone visually clean.

Shallow septic or drainage inspection point

Standard flush inspection covers integrate naturally under the S-06’s broad, low-profile form.

Low-profile cable entry box, junction box, or garden lighting transformer

Small low utility elements near terraces and paths are concealed without visual excess.

Horizontal pipe exits or conduit caps

Where pipes or conduits exit the ground horizontally, the S-06 covers the exit point cleanly.

Decorative flat stone accent

Many buyers place the S-06 purely as a flat stone accent in gravel beds, rockeries, or Japanese-style gardens — no equipment concealment needed.

The S-06 occupies the ultra-flat position in the S-series: lowest profile (19 cm) with mid-range coverage diameter (42 cm). At €175.97, it offers an ultra-low silhouette that no other model provides.

Choose S-06 when:

• The target is flat and sits flush with the ground or rises no more than ~15 cm
• A taller stone would create an unnatural bump
• The object to conceal is up to ø 42 cm wide
• An ultra-flat fieldstone accent is desired

Consider a different model when:

• You need wider coverage — S-05 (ø 49 cm, 23 cm tall)
• The object is smaller — S-01 (ø 39 cm) or S-04 (ø 33 cm)
• The object is tall — S-03 (46 cm height, dome-shaped)
• Greater coverage diameter is required — M-series (ø 51–73 cm) or L/XL series

What makes the S-06 different from other S-series models?
The S-06 is the flattest model in the entire S-series at just 19 cm tall, designed for flush-with-ground utilities.

What objects can the S-06 cover?
Flush manholes (ø 35–42 cm), ground-level drain lids, low stumps (≤ 15 cm), flat meter box lids, irrigation valve covers, cable entry boxes, and shallow inspection points.

How does S-06 compare to S-05?
Both are flat models, but S-06 is lower (19 cm vs 23 cm) with slightly narrower coverage (ø 42 cm vs ø 49 cm). Choose S-06 for truly flush objects; choose S-05 for maximum horizontal coverage.

Can someone step on the S-06?
Yes. Supports 100+ kg static load.

Is the S-06 frost-proof?
Yes. Rated from −30 °C to +60 °C.

Can I drill holes for cables or pipes?
Yes. The GFK composite can be drilled or cut; with 10–15 mm walls this takes a few minutes.